Needed more length in front, farthingale shows when I sit down. Took out Green front of forepart and found 1-2 inches of fabric folded in the seam. Yea!
Also, I needed a tutorial for sitting down whilst, and at the same time, wearing a hoop.
Most seats were fine, but when sitting between two other ladies wearing hoops, i needed to: LIFT THE HOOP CLOSEST TO MY FINGERTIPS ONE STEP BEFORE TAKING THE STEP BACK TO SIT. Got it? Somehow that made all the difference.
Need to make shoulder rolls, my partlet and camecia show too much. See photos of shoulder rolls on the 'partlet number 3' post. The pattern for a shoulder roll is an ELLIPSE! That surprised me. i found it on a PDF file somewhere with patterns for tunics.
Sleeves attachments were inefficient. Kept falling off or were too tight. Replaced stretchy hair ties with gold cord that unravels just looking at it. Used that for the 2 center loop2 and used green/gold ricrac from sleeve for the other 4. Total 6 loops.
Tomorrow is my debut in this dress as Sybille Frederick(of Cleves) at the MMRF.
Addtional changes: could put a GUARD of Blue along the bottom edge to protect it. I'm still not happy with the sleeve attachments. I re-did the shoulder rolls and they look better. But the sleeves still look saggy.
Friday, October 10, 2008
Thursday, October 9, 2008
Partlet Number Three
These are three ways I can wear the partlet I made today. I won't go into the construction, because I used a man's Medium button down shirt pattern. With a few modifications and some lace....and 5 hours later....geez, I have a nice partlet. The fabric is light weight 100 % cotton. There is a wrinkle on the left side. I may put buttons or beads or trim
on it lat
er.
on it lat
er.
Tuesday, September 23, 2008
Underpants, Drawers, Bloomers!
I made some out of muslin I had laying around. I use a pants pattern from Nana's stash. I made them crotchless. Lady Gwendolyn gave me that idea. She said when you have a hand full of skirts and accessories, you don't have to pull your pants down to pee. AND the Drawers cover the dirty toilet seat a little and that's a plus. Now I have a pair for Saturday and for Sunday. Genius!
Thursday, September 18, 2008
Chemise
I need a new chemise for the red/gold Venetian. The camecia sleeves are too bulky. I'm trying a SMOCK GENERATOR from Drea Leed, I presume. I found it here: http://www.elizabethancostume.net/index.html under 'underpinnings'. It says it will be a close fit. I had a big piece of linen from ??, 54" wide. I'm cutting it out directly, using the pattern and instructions.Okay, it's done and here are my comments.
I like the Generator. I enter my measurements and it gives me all the numbers I need. I cut it out with no problems. It sewed together just fine and fit like a cotehardie (my word for a fitted long sleeve gored dress). This will work well with the Venetian gown as the sleeves are tighter, not flared and the body is not bulky. I had to make the neckhole bigger to sit at the edge of my shoulder. This gown sits close to the edge.
One complaint is where the gores and gussets get sewn across each other. There is no way to cleanly finish that seam.
This smock is not suitable for the regular Ren Faire garb. It's not poofy at all.
I like the Generator. I enter my measurements and it gives me all the numbers I need. I cut it out with no problems. It sewed together just fine and fit like a cotehardie (my word for a fitted long sleeve gored dress). This will work well with the Venetian gown as the sleeves are tighter, not flared and the body is not bulky. I had to make the neckhole bigger to sit at the edge of my shoulder. This gown sits close to the edge.
One complaint is where the gores and gussets get sewn across each other. There is no way to cleanly finish that seam.
This smock is not suitable for the regular Ren Faire garb. It's not poofy at all.
Tuesday, September 2, 2008
A Hat for the Red/Gold Gown from 2008
Friday, August 29, 2008
A Hat for the Blue Gown from 2007
I'm not happy with the placement of these pictures, but don't know how to fix them. sorry if it's difficult to read.


Construction links are included.
It starts with putting my shoulder length, thin hair in a bun at the back of my head, below the crown. Then I wrap a fake braid around it and pin in place.
Next, I tie on the FOREHEAD CLOTH. (see http://www.extremecostuming.com/articlesii/howtowearthecoif.html) I have left the ties hanging in these photos, but at faire, I would tuck them in.
Over the Forehead cloth, I lay on the CAUL, (see http://www.sempstress.org/patterns/hatmaking/simplecaul.shtml) and secure it with a corsage pin.
Next goes the 'flat cap', bonnet, whatever you want to call it. I put it forward enough as to be in front of the bun...bulk.. if you take my meaning. (see the same sempstress.org site, just click at the bottom of the page 'semptress'. or see one of these http://www.elizabethancostume.net/index.html under 'Hats and Headwear'.)
I bought the feather and metal cone at Michigan Ren Faire and I'm sorry I don't know the name of the vendor, but it's in the back, at the top of the hill and on your way to Owain Phyfe.
Friday, June 27, 2008
Dress Sleeves


I'm beginning work on the sleeves of the red gown. we are going to Derbyshire tomorrow. I probably won't wear the new dress, as it's a 3 hour car ride and I've never been to Derbyshire before AND i'm having husband trouble.
I'm going to keep it as simple as possible.
I found two pieces of scraps for the sleeves. After much fussing with length and seam allowances, I have settled on a design. It is a tube sleeve with buttons on the outside of the top edge that attach to black hair ties sewn under the straps. Also, I made some cording for the top/bottom edges. The seams were miss matched, so hand sewed two pieces of trim to cover them.
Note to self: when using a commercial sleeve pattern, one must be laid WRONG side up, thus giving me a right and left sleeve. As it is, I have two right sleeves. It isn't a tragedy, but next time, do it correctly.
I wore the dress to GLMF, Derbyshire and the State Theatre in Bay City to see Equinnox.
Subscribe to:
Posts (Atom)




